READ INSTRUCTIONS BEFORE USING:
Work area should be clean. If you want a permanent bond then make the surface rough. If you want a temporary bond then have the surface very smooth like glass. Twist open the cap and squeeze the amount you need to have primary contact. Cure with the LED, it takes 3-4 seconds to harden. You can use Bondic® underwater but the LED is not waterproof. So shine it from the outside in to cure Bondic®. Increase strength by applying more layers.
WARNING: HARMFUL BY INHALATION, HARMFUL IN CONTACT WITH SKIN, IRRITATING TO RESPIRATORY SYSTEM, SEVERE EYE IRRITATION, VAPORS MAY BE IRRITATING TO EYES, NOSE, THROAT, AND LUNGS.
FIRST AID TREATMENT: Skin contact: Wash off immediately with soap and plenty of water, Get medical attention if irritation develops and persists. Eye contact: Flush eyes with water at least 15 minutes, get medical attention if eye irritation develops or persists. Inhalation: Move to fresh air, If symptoms persist, call a physician. Ingestion: If swallowed, Rinse mouth, Get medical attention. Protection of First-aiders: Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Notes to physician: Treat symptomatically.
For further health information contact a local Poison Control Center or 911 immediately.